Here you can find setup information for your chosen VPN and also how to fix any problems you might encounter.
You can use the Table of Contents on the right hand side of this window to navigate between the different sections.
Step 1
Retrieve the Server Address for the VPN you want to connect to, you will need this later:
Step 2
Retrieve your VPN username and password, if you are a new member this is contained in the StreamVia Account Information email you received after ordering.
Step 3
We strongly recommend you first factory reset your DD-WRT router
Step 4
Now reconfigure your wireless network, be sure to add encryption to prevent others from using your VPN/Internet connection! Or better still, disable wireless completely and use only cabled connections for best speed.
Step 5
Change the WAN Connection Type to L2TP
Step 6
Configure as follows, only make changes where the red arrows are show. Username/Password are your VPN credentials, L2TP Server is the hostname you retrieved in Step 1 of this guide
Step 7
Scroll down to the bottom and click Save Settings, then Apply Settings
Step 8
The router will then restart, if not manually restart it
Step 9
Join the wifi network if needed
Step 10
Verify that the VPN has connected, if not try and connect it as shown below